[TCML] pulse caps for large DRSSTC
dr.hankenstein at earthlink.net
Thu Sep 17 22:09:24 MDT 2009
Please sample me (free of charge) 1ea. of these capacitors as well. I
find it astonishing that in the not so recent past the use of "single
capacitors" for DRSSTC's was considered profoundly absurd; that they
would overheat and fail and couldn't handle the peak RF currents found
in DRSSTC's. That being said, what has changed? I would be happy to
evaluate and acknowledge the existence of such a fantastic device.
Please include curves (doble tests, loss, dissipation factors, power
factor) etc. for review.
From: tesla-bounces at pupman.com [mailto:tesla-bounces at pupman.com] On
Behalf Of Dave Leddon
Sent: Thursday, September 17, 2009 4:26 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] pulse caps for large DRSSTC
If you would be willing to provide to me, free of charge, a sample of
each one of these capacitors, I would be willing to verify their
applicability to DRSSTC service. Failing that, I would be willing to
join a group buy, should some generous soul be willing to set it up
(i.e., somebody other than me).
At 09:32 AM 9/17/2009, you wrote:
>I carry high-Q factor heavy duty pulse caps for medium and large size
>SSCAP-200 measures 3 3/4" x 5" x 11" and is very conservatively rated
>(800 nF) at 20 kV WVDC.
>SSCAP-400 measured 3 3/4" x 5" x 11" and is conservatively rated 1 uF
>Designed for continuous operation at 12 kV DC in H-bridge
>Contact me off-list for further information. If someone assembles a
>buy" I can provide pricing around $390 per cap.
>Tesla mailing list
>Tesla at pupman.com
Tesla mailing list
Tesla at pupman.com
More information about the Tesla