[TCML] pulse caps for large DRSSTC
f-h at c.dk
Sat Sep 19 03:34:15 MDT 2009
So you _do_ acknowledge the benefit, and need, to distribute the charge
over multiple separate sections.
Since there is consensus on this point, all we need to determine now, is
the point of diminishing returns with regard to sectioning.
My own DRSSTC, the "Thumper", (with the novel "Predikter" driver
circuitry) is a well documented coil. And although it is not record
setting (Aron Koscho did that a while ago), it is currently the most
powerful coil of it´s kind.
It uses 100 pcs. of Cornell Dubilier 940 series 1.5µF, 1600VDC caps.
It has been pushed to 5000Apri, and to no ill effect.
The cost of this cap was about 800USD.
It would be nice if you would inform this list in some detail, about the
caps you talk about.
Pricing, internal sectioning, manufacturer, Peak current handling as
well as RMS current handling.
These specs are readily available from CD, and this is no doubt the
reason for their success.
We get, not only what we pay for, but also what we design to.
Cheers, Finn Hammer
DC Cox skrev:
> They are comprised of series sections and parallel sections to spread out
> the thermal load over a large area.
> Dr. Resonance
More information about the Tesla