[TCML] Pole Pig

[BunnyKiller]

Hey Robert...

went to the Ebay listing you supplied and saw 3 things that will be 
"unsatisfying" if you purchased the units pictured.

1.  They are 50KVA  =  Huge, very heavy, very hard to move around in 
general aspects.
2.  The voltage stated it was 7200 V. Rather on the low side for Tesla 
coiling ( really should be in the 14,000 range)
      Kinda like putting a lawn mower motor in an 18 wheeler truck.
3.  I saw only 1 insulator on top, this requires you to do some 
different wiring ( not like an NST with 2 insulators) to get things to work.

oh yea...  there is a number 4

4.  Current limiting a piggie that size would be a challenge...

Scot D



Robert Davies wrote:

>Hello All,
> A while back I purchased a 50kv x-ray transformer for my projects. Now I have the opportunity to purchase a pole pig that is in my local area. My question is what are your thoughts on the price? also I have found they are not so easy to get in Florida and if it's not local shipping can be more than the unit itself. This one I don't have to build a container for and locate oil and the like.
>
>
>http://cgi.ebay.com/ABB-50-KVA-Pole-Type-Transformers-12470-GY-7200-120-240_W0QQitemZ150360378657QQcmdZViewItemQQptZBI_Circuit_Breakers_Transformers?hash=item23022d4d21&_trksid=p4634.c0.m14.l1262
>_______________________________________________
>Tesla mailing list
>Tesla at pupman.com
>http://www.pupman.com/mailman/listinfo/tesla
>
>  
>