[TCML] method of routing secondary wire to toroid

[Antonio Carlos M. de Queiroz]

Craig wrote:
> I searched the archives, but can't find the specific answer I'm looking for.
> What is the best way to route the secondary wire from the last turn to the
> toroid? I've read where some space wind in free air up to the base of the
> toroid,
I made my secondaries with the wire ending at both sides soldered at 
rounded rectangles of brass foil
glued to the tube.
The assemblies at the lower and upper ends touch these tabs with metal 
foil springs. Nothing critical,
as the current there is not too high, and very solid and robust.

Antonio Carlos M. de Queiroz