[TCML] Filters

[David Speck]

Jay,

You may need a paralleling choke if you want to connect multiple Variacs 
in parallel, but you can connect filters in parallel without any special 
consideration.

Only downside is that two parallel filters will let twice as much noise 
through as a single filter, just as putting two resistors in parallel 
will give you half the resistance of either individual resistor.  
Probably not a huge problem in most applications.

Dave



On 4/19/2010 4:45 PM, jhowson4 at comcast.net wrote:
> That is what I figured but I was not sure.
> Somewhere in my studies i thought i remembered hearing that you could not connect filter circuits together with out special stuff.
>
> Thanks,
> John "Jay" Howson IV
>