[TCML] New Coil

[John Forcina]

How high above the top of the secondary are you placing the topload?  From
the looks of it from http://www.cmnow.com/TeslaMan/tn25.htm you are placing
it on top of that smaller piece of pipe?  That is just too high and it will
provide very little Electrostatic shielding for the top of the secondary and
you will get lots of loss and corona breaking out every were.

On Wed, Mar 3, 2010 at 1:28 PM, Miles Mauldin <teslamiles at att.net> wrote:

> Hi all,
>
> Built my first TC in 1976 and haven't done it again since until now.
> Things have changed since then; all I had back then was campus and public
> libraries.  Thought I would share my project photosand I must admit, I am
> rather proud of my Terry Filter.  Still a lot of work to do but I think I am
> off to a good start.  Comments, questions, criticism, praise, all welcome.
>
> http://www.cmnow.com/TeslaMan
>
> Miles
> _______________________________________________
> Tesla mailing list
> Tesla at pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>