[TCML] Touching 500Kv Tesla coil

[McCauley, Daniel H]

All electricity should be respected, no matter the voltage.  Industry standards state that accidental (or intentional) contact of all voltages above 30V or 50V (depending on standard) shall be avoided.

You should never attempt to touch the output of any Tesla coil, as well as the primary circuits.

Dan
http://www.easternvoltageresearch.com
CM300 Based DRSSTC Universal Driver and Power Board Kit - COMING SOON!


> I showed my coil to my parents and family but it looks like they didn't
> interest much in it So for more thrill i'm going to touch my coil while i'm
> not touching ground (sitting on a wooden chair).
> NST is 12 @ 30mA
> and coil is ~ 500Kv in small current
> Javatc says that freq is ~ 180Khz
> Is it going to kill me?
> _______________________________________________
> Tesla mailing list
> Tesla at pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla at pupman.com
http://www.pupman.com/mailman/listinfo/tesla