[TCML] Variacs and Pole Pigs

[jhowson4 at comcast.net]

I second Phil's motion, 
I am trying to see what you are describing but I have no clue. 

If you want t draw a picture using microsoft paint and send it to me off list, i will be happy to put it on my photobucket and share the link with the list for you. 



Thanks, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off your hands." 

----- Original Message -----
From: "Philip" <phil at hvtesla.com> 
To: "Tesla Coil Mailing List" <tesla at pupman.com> 
Sent: Saturday, April 7, 2012 2:14:29 PM 
Subject: RE: [TCML] Variacs and Pole Pigs 

You need to either draw the circuit out and scan it, or use a graphics or 
paint program. Then post it on a picture hosting site. 

Regards 
Phil Tuck 

www.hvtesla.com 


-----Original Message----- 
From: tesla-bounces at pupman.com [mailto:tesla-bounces at pupman.com] On Behalf 
Of Neon Tesla 
Sent: 07 April 2012 05:58 
To: tesla at pupman.com 
Subject: Re: [TCML] Variacs and Pole Pigs 

The ballast arrangement is very strangely, configured (I haven't ever seen 
it like this before, sorry about the first bad diagram.) 

The variac is wired normally; 
the ballast bridges around the end of the hot side of the variac's 
attachment to the pig line; 
but instead of the hot line of the pig continuing, it stops at the variac, 
being forced through ballast, leaving the variac untouched by the current. 

Would this work? 
_______________________________________________ 
Tesla mailing list 
Tesla at pupman.com 
http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________ 
Tesla mailing list 
Tesla at pupman.com 
http://www.pupman.com/mailman/listinfo/tesla