[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: cockcroft for marx charging (fwd)




---------- Forwarded message ----------
Date: Tue, 16 Dec 2003 14:41:48 -0600
From: Dr. Resonance <resonance@xxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: cockcroft for marx charging (fwd)


You said you have a 1 megOhm resistor in series with the output?  What was
the total voltage rating of the resistor?  If less than say 300 kV on a 300
kV machine the energy will flash over the resistor and totally ignore it.

Also, in a Marx machine, the charging power supply must be disconnected from
the unit prior to firing.  We use a 6 inch gap relay under oil to do this on
our machine.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "High Voltage list" <hvlist@xxxxxxxxxx>
To: <hvlist@xxxxxxxxxx>
Sent: Monday, December 15, 2003 8:54 PM
Subject: Re: cockcroft for marx charging (fwd)


> Original poster: Steven Roys <sroys@xxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Mon, 15 Dec 2003 14:33:55 -0600
> From: Dr. Resonance <resonance@xxxxxxxxxx>
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: cockcroft for marx charging (fwd)
>
>
> Most large CW machines employ an inductance (100-200- uH) in series with a
> resistance.
>
> Dr. Resonance
>
> Resonance Research Corporation
> E11870 Shadylane Rd.
> Baraboo   WI   53913
> >
> >
> >
> > ---------- Forwarded message ----------
> > Date: Wed, 10 Dec 2003 23:26:22 -0000
> > From: colin.heath4 <colin.heath4@xxxxxxxxxxxx>
> > To: High Voltage list <hvlist@xxxxxxxxxx>
> > Subject: cockcroft for marx charging
> >
> > [Sorry for the delay in posting.  The list has been SOOOOOOOOOOOOOOOOOOO
> > dead, that I got out of the habit of checking it.  Hint hint.  SRR]
> >
> > hi all,
> >         well i have a cockcroft walton ill be using to charge my marx.
but
> i
> > killed alot of components on my last one due to either under rated or
too
> > much backfeed. how can i stop this. i had 1mohm of reistance on the
output
> > of cockcroft to try and stop it.
> > cheers
> > colin
> >
> >
> >
> >
>
>
>