[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Really high voltage potting (Potting on the Cheap) (fwd)
- To: <hvlist@xxxxxxxxxx>
- Subject: Re: Really high voltage potting (Potting on the Cheap) (fwd)
- From: Steven Roys <sroys@xxxxxxxx>
- Date: Mon, 8 Sep 2003 20:43:42 -0600 (MDT)
---------- Forwarded message ----------
Date: Mon, 8 Sep 2003 07:49:28 -0500
From: Dr. Resonance <resonance@xxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Really high voltage potting (Potting on the Cheap) (fwd)
Use 3M #77 spray adhesive. An excellent contact cement. Spray both parts,
leave airdry for 5 min., and then stick together.
Dr. Resonance
Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo WI 53913
>
> I am searching for a good method of gluing a stack of two or three
> acrylic disks, to make an electrostatic machine with embedded sectors
> in the disks. Imagine a Wimshurst machine with the sectors inside the
> disks, accessed only through small buttons.
> I tried so far two methods: