Re: Capacitor test results

In a message dated 96-05-24 00:37:01 EDT, you write:

>Ed:  This sounds real dumb, but maybe you have an open in the primary
>between the gap and the primary winding.  My clip slipped off the primary
>without my seeing it during a quiet moment, and when I fired the coil up
>again, the cap was arcing and I KNEW things weren't right until I put the
>load back in the circuit.
>With some trepidation, 


Since I cannot figure this problem out, nothing sounds dumb.  Anything is
possible.  Since I set the system up two different times, I don't think I
forgot to set the tap position.  I will, however do all this one more time
before I start dismantling everything.

Ed Sonderman