[Prev][Next][Index][Thread]

Re: Polyethylene



On Tue, 12 Nov 1996, Tesla List wrote:

>           I'd like some advice please. I am wanting to finish my hi-V
> scope probe off by filling the tube. I thought about the ease with 
> which hot-melt runs and thought, yeah - polyethylene. I have a large
> collection of old copier toner HDPE bottles. I tried melting a few in 
> a pot to pour into the probe tube. I reckon at around 180 degrees C
> in the oven the stuff was on the verge of burning but still nowhere 
> near molten. Does anyone have some advice on either how I can do this
> or a suggestion for an alternative filling? I could use wax I guess.

You can melt LDPE into Paraffin wax! Just search the mailing list
archives for a "recipe". Basicly you heat Paraffin wax into a liquid and
then start adding pieces of ldpe.

Kristian Ukkonen.

---------------------------------------------------------------------------
| Kristian Ukkonen       |  Do as thou wilt shall be the whole of the law |
| kukkonen-at-alpha.hut.fi  |_____  Chance favours the prepared mind  |-------
| http://www.hut.fi/~kukkonen |  Fear is the mind-killer  |---------
-----------------------------------------------------------              42