Re: Beating Solved

To: tesla-at-pupman-dot-com
Subject: Re: Beating Solved
From: Skip Greiner <sgreiner-at-mail.wwnet-dot-com>
Date: Fri, 20 Sep 1996 16:46:09 -0700

Tesla List wrote:
<SNIP>
> Bert (and the gang) -
<SNIP>
> Power:
> 
> 120:1 ratio potential transformer, rated 1.5 KVa, but will go to
> 3.5 KVa before saturating - max output = 12KV
> 
> (2) 20-amp, 120-volt variacs in parallel through paralleling choke
> (1) 30-amp, 30-volt varaic as variable inductance
> (1) extra toroidial inductor (don't have the inductance spec handy)
> 
> This is a very, plain-vanilla setup. In fact, I've gotten the
> thing to the point where I can pack the coil *and* the insulated
> table (see the BRENT_x.JPG images) into the back of my pickup so
> that I can take the system around and perform shows and demos with
> it...
> 
> I hope to have more photos coming - stay tuned....(pun intended!!!)
> 
> - Brent


Beautiful pics Brent. One question...How many breaks per each half cycle
of the mains does your synchronous break do.

Thanks
Skip