High Pressure

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: High Pressure
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Wed, 3 Dec 1997 07:57:25 -0600
• Approved: tesla-at-stic-dot-net

From: 	rbeldyk-at-wscc.edu[SMTP:rbeldyk-at-wscc.edu]
Sent: 	Wednesday, December 03, 1997 7:27 AM
To: 	tesla-at-poodle.pupman-dot-com
Subject: 	High Pressure

Has anyone ever run TC in an enviroment that had a high air pressure.  I
was doing some experiments, a few years ago, with plate caps using high
pressure compressed air(790 kPa to 1.8 MPa) as the dielectric and got some
interesting results.


One word of caution use an oil and HC free compressed air or you run the
risk of a compressed air line fire.

Rich

• Prev: Re: Heating PE in oven.
• Next: Re: Hookup Wire
• Index(es):
  • Main
  • Thread