Re: Pri/Sec coiling

• To: tesla-at-pupman-dot-com
• Subject: Re: Pri/Sec coiling
• From: Rodney Graham Davies <Rodney.Davies-at-anu.edu.au>
• Date: Wed, 5 Feb 1997 23:50:53 +1100 (EST)
• Subscriber: Rodney.Davies-at-anu.edu.au Fri Feb 7 00:04:30 1997

Hi Mike,

On Tue, 4 Feb 1997, Tesla List wrote:

> >I wound the primary and secondary in the same direction on my 6" coil.
> > Richard Quick later told me it makes no difference.  On my recent 3" coil, I
> >didn't even think about it.
> >
> >Ed Sonderman
> 
> Rod and Ed,
> 
> On my 4 inch coil I ended up with the primary and secondary wound
> in opposite directions. Didn't plan it that way, it just happended.
> Makes no difference. Works just fine.

No probs. I think I'll experiment a little with this idea on a couple of 
small coils I have built (3" diam formers)...if I see anything 
significant, I'll let you know...

Cheers!

Rod

• Prev: Re: Calculating Capacitor currents
• Next: Re: Rolled Caps
• Index(es):
  • Main
  • Thread