Re: In vs. Out [small magnefier ]

To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
Subject: Re: In vs. Out [small magnefier ]
From: Tesla List <tesla-at-stic-dot-net>
Date: Wed, 23 Jul 1997 12:23:20 -0500
Approved: tesla-at-stic-dot-net


From: 	DR.RESONANCE[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: 	Tuesday, July 22, 1997 5:33 PM
To: 	Tesla List
Subject: 	Re: In vs. Out [small magnefier ]

To: David

Thanks for the data -- I will keep you posted on our results.

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: 'Tesla List' <tesla-at-poodle.pupman-dot-com>
> Subject: Re: In vs. Out [small magnefier ]
> Date: Tuesday,July 22,1997 11:02 AM
> 
> 
> From: 	David Trimmell[SMTP:dwt-at-efn-dot-org]
> Sent: 	Monday, July 21, 1997 11:33 AM
> To: 	Tesla List
> Subject: 	Re: In vs. Out [small magnefier ]
> 
> DR.RESONANCE:
> 
> "I have an 803 with matching 3,000
> volt, 1.2 ampere power supply and matching filiment xmfr."
> 
>  3200 Watts seams abit high for one 803. The plate is rated at 2000v
> with only 125 Watt dissapation. I have two, and powered with filtered DC
> the plates get a nice dull red glow at about 1200 Watts.
> 
> "I'm not looking for spark-excited performance but thought a nice 36-48
> inch discharge would be a good starting point."
> 
>  I believe John Freau was able to get 36" with around 5KVA?
> 
>  One of my next projects would be to do what you sugest, a free
> resonating Tube powered coil. Let me know how you progress. One
> question, though, how will the tight coupling between primary and
> secondary affect the feedback/grid coil? Any major modifications?
> 
> David Trimmell
> 
>