[Prev][Next][Index][Thread]

Re: Ground system



Subject:     Re: Ground system
      Date:  Wed, 04 Jun 1997 11:10:05 -0500
      From:  rickh-at-ghg-dot-net (Rick Holland)
        To:  Tesla List <tesla-at-pupman-dot-com>
References:  1


Tesla List wrote:

> Also, if your rods are copper coated, is it possable to solder large
> gague wire or sheet to them?
> 
> David Knaack

David,

Plumbers solder copper pipe all the time. It takes a torch and a lot of
flux, but if your connections are clean to begin with, it isn't
difficult. The main idea is to get the pipe (and wire) hot enough to
melt the solder as opposed to melting the solder with the flame.
-- 

     Rick Holland

     The Answer is 42.