[Prev][Next][Index][Thread]

Re: -! Re: Moody Bible Ins (fwd)



Dr. Resonance wrote:
> 
> To: Daryl
> 
> This procedure was widely published in the 1940's and 50's while they were
> using Van de Graaff type power supplies for linear accelerator tubes.
> 
> If you are interested in the procedure just look up the publications in
> Physical Review and also Scientific Instruments with articles by Van de
> Graaff, Trump, Breit, Tuve, and Dahl.  The procedure is well documented in
> these older publications.
> 
> It isn't exactly safe for the average experimenter to try because of all
> the lead shielding required (we borrowed ours) for the very high energy
> X-rays.  The self-rectifying tubes operate on the peak pulse voltage.  See
> also the publication by Sloan who used this method to build the first 1 MEV
> 100 KW X-ray resonance transformer for G.E.
> 
> DR.RESONANCE-at-next-wave-dot-net
> 
> ----------
> > From: Tesla List <tesla-at-pupman-dot-com>
> > To: tesla-at-pupman-dot-com
> > Subject: RE:-! Re: Moody Bible Ins (fwd)
> > Date: Monday,March 03,1997 9:31 PM
> >
> >
> >
> > ---------- Forwarded message ----------
> > Date: Mon, 03 Mar 1997 06:46:57 -0500
> > From: "Daryl P. Dacko" <mycrump-at-concentric-dot-net>
> > To: Tesla List <mod1-at-pupman-dot-com>
> > Subject: RE:-! Re: Moody Bible Ins (fwd)
> >
> > At 02:14 PM 3/1/97 -0700, you wrote:
> >
> > <snip>
> >
> > >M>We have gone to the trouble of self-rectifying the output of a large
> > >M>oscillator and then using the DC peaks to generate X-rays.  By
> carefully
> > >M>measuring the energy and frequency of the generated X-radiation we
> were
> > >M>able to measure the peak output potential to within 100 electron
> volts.  We
> > >M>also used this technique to measure the peak DC output of some large
> Van de
> > >M>Graaff generators we constructed.
> > >
> > >M>DR.RESONANCE-at-next-wave-dot-net
> > >
> > >          "...peak output potential to within 100 electron volts."
> > >
> > >
> > >        Eh?  Huh!?  Wha...?!   This is truly a sensational breakthru.
> > >        One can only hope that you succeed in getting a paper on it
> > >        into "Physical Reviews" or the "Journal of Physics".  Just
> > >        think -- suddenly energy and force become one!  Undoubtedly
> > >        a major advance toward a unified-field theory.
> >
> > <snip>
> >
> > Uh, despite problems with exact meanings of words and such, just why
> > wouldn't this work ?
> >
> > As far as I know, any x-ray spectra will, holding everthing else
> constant,
> > indicate the voltage applied quite exactly...
> >
> > Not saying it would be easy by any means, just that I can't see why it
> > wouldn't work ;'}
> >
> > Daryl