Re: Pri-Sec Phasing

• To: tesla-at-pupman-dot-com
• Subject: Re: Pri-Sec Phasing
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Mon, 6 Oct 1997 17:54:00 -0600 (MDT)
• Approved: mod1-at-poodle.pupman-dot-com

---------- Forwarded message ----------
Date: Sun, 05 Oct 1997 22:52:29 +0000
From: Greg Leyh <lod-at-pacbell-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Pri-Sec Phasing 

Malcolm Watts wrote:


> I will do a test next time I am coiling. I will simply measure the
> distance a spark can jump between the top of the primary and a
> certain distance up the secondary coil with two primaries wound with
> opposite handedness. I haven't found any need to phase them in a
> resonant setup. Quite different if k around 0.9 or so.

That will be an interesting test, as the inter-winding arcing
is the bottom line in all of this.  I'll look for your results.


-GL

• Prev: Re: Transformers, Grounding, Cable questions.
• Next: Spun toroid sources
• Index(es):
  • Main
  • Thread