Plans for RSG

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Plans for RSG
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Wed, 24 Sep 1997 00:32:46 -0500
• Approved: tesla-at-stic-dot-net

Rodney[SMTP:rstapivic-at-sprynet-dot-com]
Sent: 	Tuesday, September 23, 1997 6:48 PM
To: 	Tesla List
Subject: 	Plans for RSG

Hello everyone,

I've been lurking on this list for the past 3 months, and spending a
considerable amout of time reading through the archives.  Currently I have
been building a coil in my spare time:
10.5" in diameter
35" total winding length of #22 enameld magnet wire
Primary is 1/2" copper tubing spaced 1/4" for a total of 15 turns.  
I'm going to power this coil using a 14.4 kv-10 kva pole pig.  My question
is: would anyone have plans for an asynchronous RSG?  I'm familiar with
construction (IE: using Tungsten electrodes, G10 Phenolic for rotor, ect.).
 Thanks for all the great info I have found on this board.

Thanks,
Rodney

• Prev: HV at very LOW freq. Tesla Coil
• Next: And what of the FCC?
• Index(es):
  • Main
  • Thread