[Prev][Next][Index][Thread]

Re: My Coil: Problems?




---------- Forwarded message ----------
Date: Sun, 28 Sep 1997 13:12:19 -0500
From: teslaman-at-juno-dot-com
To: tesla-at-pupman-dot-com
Subject: Re: My Coil: Problems?


On Sun, 28 Sep 1997 08:02:39 -0600 (MDT) Tesla List <tesla-at-pupman-dot-com>
writes:
>
>
>---------- Forwarded message ----------
>Date: Sat, 27 Sep 1997 19:50:38 -0400
>From: Tom Heiber <theiber-at-lonet.ca>
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: My Coil: Problems?
>
>Hey, I am back. I was away for a while but now I'm back at coiling.
>
>Anyways, I'll get straigth to the point. I have a medium size neon 
>xfrmer coil.
>The Neon xfrmr is a 12Kv -at- 60mA (Jefferson) . Anyway I tried to add a 
>second
>xfrmer so i bought one. A different company though since I couldn't 
>find a
>Jefferson, This one is a Allanson. Anyhow. Both xfrmers are 12Kv -at- 
>60mA, BUT.
>The Jefferson indicates 720VA on the plate while the Allanson shows 
>360VA. How
>can that be? Mathematically it should be 720, right?
>

 I believe the difference is due to some neon xformers have power factor
capacitors built in on the primary winding.   I have seen several P.F.
caps while tearing down the transformers.   Incidently the ones I have
found with the capacitors were Allenson's.
Kevin E.

<SNIP>