From: Jim Lux [SMTP:jimlux-at-earthlink-dot-net]
Sent: Saturday, April 18, 1998 2:38 PM
To: Tesla List
Subject: Re: First Light
> From: Hollmike [SMTP:Hollmike-at-aol-dot-com]
> Sent: Friday, April 17, 1998 12:03 AM
> To: tesla-at-pupman-dot-com
> Subject: Re: First Light
> I used a short length of 3 inch pvc pipe affixed to an inverted floor
> drain for my first coil. It is about 16 inches tall. It seems to be
> stable and was fairly cheap.
I found some 4" PVC pipe in the scrap pile and then found a pair of
bushings that slide inside that normally serves as a reducer to 2". A
suitable bolt through the bushing should work admirably.