Re: Fw: Input frequency (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: Fw: Input frequency (fwd)
From: Tesla List <mod1-at-pupman-dot-com>
Date: Tue, 4 Aug 1998 21:36:10 -0600 (MDT)
Approved: mod1-at-pupman-dot-com


---------- Forwarded message ----------
Date: Tue, 4 Aug 1998 18:14:00 +0100
From: "chris.swinson" <chris.swinson-at-zetnet.co.uk>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Fw: Input frequency (fwd)


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: 04 August 1998 03:03
Subject: Re: Fw: Input frequency (fwd)


>
>
>---------- Forwarded message ----------
>Date: Mon, 03 Aug 1998 10:09:34 +0300
>From: Marco Denicolai <marco-at-vistacom.fi>
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: Re: Fw: Input frequency (fwd)
>
>At 21:54 02/08/98 -0600, you wrote:
>>
>>
>>---------- Forwarded message ----------
>>Date: Sun, 2 Aug 1998 12:50:09 +0100
>>From: "chris.swinson" <chris.swinson-at-zetnet.co.uk>
>>To: tesla list <tesla-at-pupman-dot-com>
>>Subject: Fw: Input frequency
>>
>>
>>-----Original Message-----
>>From: chris.swinson <chris.swinson-at-zetnet.co.uk>
>>To: tesla list <tesla-at-pupman-dot-com>
>>Date: 01 August 1998 22:09
>>Subject: Input frequency
>>
>>
>>Hi All,
>>
>>Say if you had a Neon say, 10Kv at 50ma running on the usual 230V 50Hz
>>mains.  As far as I can gather if you use 230V input but at 100Hz you
would
>>actually get 20Kv at 50ma, thus more wattage input.
>
>You'll get the same 10kV, 50mA but at 100 Hz frequency. Probably less,
because
>increased frequency will result in increased core losses and your output
power
>will drop down.
>

The greater input frequency may appear to give more voltage, I have tried a
experiment, please read the other mails.

thanks !

chris.swinson-at-zetnet.co.uk



>
>________________________________________________________________________
>
> Marco Denicolai                   Vista Communication Instruments, Inc.
> Hardware Development Manager      www.vistacom.fi
>
> marco-at-vistacom.fi                 Kaisaniemenkatu 13 A
> fax:    +358-9-622-5610           SF-00100 HELSINKI
> phone:  +358-9-622-623-15         Finland
>
>   Remember, Murphy was an optimist! I am not...
>________________________________________________________________________
>
>
>