[Prev][Next][Index][Thread]

Secondary coil diameter





----------
From:  Gottfrid Svartholm [SMTP:wargen-at-hem1.passagen.se]
Sent:  Tuesday, August 11, 1998 6:22 AM
To:  Tesla List
Subject:  Re: Secondary coil diameter

Just a small question, what happens if the sec. coil is too large for
the transformers/caps to drive?

//Gottfrid
Tesla List wrote:
> 
> ----------
> From:  Michael Tucknott [SMTP:Michael.Tucknott-at-virgin-dot-net]
> Sent:  Monday, August 03, 1998 12:31 AM
> To:  Tesla List
> Subject:  Re: Secondary coil diameter
> 
> Tesla List wrote:
> >
> > ----------
> > From:  Gottfrid Svartholm [SMTP:wargen-at-hem1.passagen.se]
> > Sent:  Sunday, July 05, 1998 5:12 PM
> > To:  tesla-at-pupman-dot-com
> > Subject:  Secondary coil diameter
> >
> > Which secondary coil diameter would be the best to run from a 8kV/45ma
> > neon?
> > I'm using salt water caps, and can easily make more to get optimum
> > capacitance
> > for the sec. coil.
> >
> > //Gottfrid
> 
> Hi Gottfrid
> The coil myself and Dr B built usues a 10Kv 50mA OBIT
> and is wound on pipe with an OD of 4.25" the lenght is 22"
> and the coil has hit 26" discharge.
> And we use the good old S/W caps.
> 
> Cheers Mike Tucknott