[Prev][Next][Index][Thread]

Hi All




----------
From:  Malcolm Watts [SMTP:MALCOLM-at-directorate.wnp.ac.nz]
Sent:  Sunday, August 23, 1998 4:28 PM
To:  Tesla List
Subject:  Re: Hi All

Hi Cabbott,

> From:  Cabbott Sanders [SMTP:cabbott-at-cyberis-dot-net]
> Sent:  Friday, August 21, 1998 2:51 AM
> To:  Tesla List
> Subject:  Hi All
> 
> Hello, my name is Cabbott Sanders.... I am a fairly inexperienced Tesla coiler,
> with a lot of extra cash and a hellava big project on my hands... to produce ball
> lightning using an out-of-phase dual tesla coil arrangment.  This has been done
> before, but didnt recieve much recognition and was dropped immediately after these
> two physicists made up some theory about how ball lightning works.  My website
> still needs to be updated, but it details my design work.
> 
> I am currently constructing two seperate tesla coils, both running off of the same
> cap/power supply.. (Has this been done by anyone recently?)  but with one
> catch....(hehe) listen carefully:
> 
> The primary frequency will be constant with both primaries... (both primaries will
> be identical, hooked in series)
> 
> however, the secondaries will be much different.
> one will resonate at double the frequency as its primary, and the other will
> resonate at 3 times the frequency of the primary.  the primaries (hooked in
> series) will act as a hammer to each coil, making each one ring at its own
> specific frequency.  Why you may ask?  well because... each coil will at first be
> in sync... but as they ring, suddenly they become completely 180 degress out of
> phase!! this sudden rise in potential gives way to a sudden direct discharge
> between coils.  this is the secret to artificial ball lightning generation, as
> proven by Corumn and Corumn in 1991. (I have references)  Now there is a complex
> theory behind all this, and that is what i am about trying to explain and prove
> with my setup. Basically, what it takes to make ball lightning, is to achieve the
> MAXIMUM rise in current density within a space. Yes, there is a maximum rate that
> a current flowing from point a to b can change. they've done this experiment
> dozens of times, in countless universities. its called the "z-pinch" experiment.
> However, they seem to think they have reached the  maximum current density in the
> universe.... when actually they have just reached the maximum change in current
> density. what happens when a plasma reaches this limit? ball lightning!

What is to stop you reaching those potentials with a single coil? 
Don't streamer propagation times determine the speed with which 
discharge currents build up? I'll be very interested to hear your 
results.

Malcolm
<snip>