[Prev][Next][Index][Thread]

Coil Form Materials




----------
From:  D.C. Cox [SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent:  Monday, June 15, 1998 11:34 AM
To:  Tesla List
Subject:  Re: Coil Form Materials

to: Stefan

Use a few coats of GE Glyptal (electric motor repair shops).  With that
size secondary try 18 AWG with 3 kV PVC insulation or 16 AWG pvc house
wiring.

DR.RESONANCE-at-next-wave-dot-net


> From:  Stefan Bishay [SMTP:stefan00-at-gte-dot-net]
> Sent:  Sunday, June 14, 1998 1:18 AM
> To:  tesla-at-pupman-dot-com
> Subject:  Coil Form Materials
> 
> Will sonotube work for a secondary coil form, provided it is coated with
> polyurethane or something? I intend to wind a 12x48" secondary, and can't
> afford PVC or NMC. Also, I was planning on using #18 wire, is that the
best
> choice?
> 
> 
> Stefan Bishay
> KC7SJC				            
> Seattle, WA	                   
> ICQ 2141646
> "Hell, we all die in the end"
> 	-Jello Biafra      
>