[Prev][Next][Index][Thread]

oil again....




----------
From:  Hollmike-at-aol-dot-com [SMTP:Hollmike-at-aol-dot-com]
Sent:  Friday, June 19, 1998 6:47 AM
To:  tesla-at-pupman-dot-com
Subject:  Re: oil again....

Hey Kevin,
    I would use the oil you bought.  You could probably warm it a
little(taking care not to overheat the plastic or whatever dielectric you are
using) to aid in bubble removal.  You might try a test:  Use a pint of mineral
oil from the drugstore to thin some(maybe up to a gallon) of the oil you
bought.  If they mix easily, you could get the ideal viscosity.  I wouldn't
mind have mineral oil that is a bit more viscous than the drugstore variety.
  Just a thought.
Mike Hollingsworth.