[Prev][Next][Index][Thread]

poly cap "test to the death!"




----------
From:  Jeff Corr [SMTP:corr-at-enid-dot-com]
Sent:  Friday, March 13, 1998 1:34 PM
To:  Tesla List
Subject:  Re: poly cap "test to the death!"

>Would you please provide the construction information
>such as what type of dielectric you used and how thick
>it was and what type of foil you used in the construction
>of this capacitor.  I apologize that I missed it if you
>had already posted it.  Thank you.


Rolled poly cap, oiled filled (mineral oil; vacuumed)
3.5mil of poly, 9 layers of poly between each plate.
Alluminum foil as plates.  Plates were 12"x40";
poly was cut to 15"x45".