Re: Primary Flashover

• To: tesla-at-pupman-dot-com
• Subject: Re: Primary Flashover
• From: Roderick Maxwell <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Wed, 25 Nov 1998 21:30:59 -0700
• Approved: terryf-at-verinet-dot-com

Tesla List wrote:
> 
> Original Poster: Hollmike-at-aol-dot-com
> 
> In a message dated 11/22/98 4:58:55 AM Mountain Standard Time,
> tesla-at-pupman-dot-com writes:
> 
> >  I don't want to change the
> >  coupling by removing the first turn of the primary or raising the
> >  secondary. Does anyone have a solution?
> 
> You could apply several coats of epoxy to the bottom windings of the
> secondary.   You could also do the same to the first turn of the primary, or
> slide a length of  tubing(silicone or maybe tygon) onto it.
> Mike
> ]


  I want to thank everyone for posting replies to this question. I have
been very busy of late and have not had a chance to reply. I have
decided to take the advice of another coiler and wrap some poly around
the base of the secondary to see if that helps.



                               Frankensteins Helper
                                       Max

• Prev: Wound secondarys
• Next: Re: IMPORTANT: RESEARCH ON WHAT?
• Index(es):
  • Main
  • Thread