coil power switch

From: 	Christopher Stone[SMTP:stone-at-etak-dot-com]
Sent: 	Thursday, January 08, 1998 6:58 AM
To: 	tesla-at-pupman-dot-com
Subject: 	coil power switch 

I am building a small (4") coil powered by a 9KV 30ma NST, all of 
the primary circuit components will be enclosed in a box made of 
plexiglass and wood.  My question is should I put the switch on the 
enclosure or should it be remotely located in a separate box.  I 
have not really noticed how this is set up except on the really 
big coils.

Any suggestions?