rotary gap failure found (fwd)
Date: Thu, 22 Jan 1998 10:54:52 -0700
From: dwight duncan <duncand-at-ccsalpha2.nrl.navy.mil>
Subject: rotary gap failure found
Hello All and thanks,
To Mr. Tom Mcgahee, I think you hit my problem right on the nose!
My transformers are the H&R 5 KV 300ma variety. Also I had my tank cap
hooked up when I adjusted the safety gap. I just ordered a replacement
transformer and I will try your suggestion of safety gap adjustment
procedure while I am trying to hunt down a synconus motor.
You had mentioned modifying the transformers. Could you elaborate on
this modification. They are extremely tough to get into without damaging