Re: Winding primaries

• To: tesla-at-pupman-dot-com
• Subject: Re: Winding primaries
• From: Terry Fritz <twftesla-at-uswest-dot-net>
• Date: Mon, 20 Dec 1999 12:02:44 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
• In-Reply-To: <3.0.1.32.19991220212039.010b4bb4-at-pop.clear-dot-net.nz>
• References: <4.1.19991219203729.009f7c30-at-pop.dnvr.uswest-dot-net> <19991220030917.41660.qmail-at-hotmail-dot-com>

Hi Alan,

I made a mistake in my original post.  The tubing is 1/4 inch diameter.
The air space between the tubing is 1/8 inch.  The center to center
distance is 3/8 inch.

Cheers,

	Terry


At 09:20 PM 12/20/1999 +1200, you wrote:
>Terry said:
>>I made a really nice primary with 1/4 inch copper refrigeration tubing from
>>the hardware store.  It is a big thing and has about 20 turns spaced only
>>1/4 inch apart.  See the pictures at:
>>http://www.peakpeak-dot-com/~terryf/tesla/experiments/modact/modact.html
>
>Is that 1/4 inch centers or dist. from one edge of copper pipe to other pipe?
>
>-----------------------
>*********************** pipe A on turn n   <-]
>-----------------------  <-]                 ]
>                           ] 1/4 inch        ] 1/4 inch centers
>-----------------------  <-]                 ]
>*********************** pipe A on turn n-1 <-]
>-----------------------
>
>Which one?
>
>-AlanP
>

• Re: Winding primaries
• From: Terry Fritz <twftesla-at-uswest-dot-net>

• Prev: RE: Dialectrics in Plate Capacitors
• Next: RE: 12 volt primary circuit.
• Index(es):
  • Main
  • Thread