[Prev][Next][Index][Thread]

Re: Tube coil capacitors



Bob,
CRT's have an inner and outer conductive coating (aquadag) with thick glass
in-between, forming a good glass capacitor.  Since the electron gun is not
powered, and no electrons are being accelerated in a vacuum, no X-rays are
possible.  A capacitor, nothing more or less.  The only hazard is a possible
implosion should the glass fail due to a hv puncture.

Bert Pool


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Thursday, February 18, 1999 2:44 PM
Subject: Re: Tube coil capacitors


>Original Poster: bob golding <yubba-at-clara-dot-net>
>
>At 12:48 17/02/99 -0700, you wrote:
>>Original Poster: "Phillip D. Rembold" <prembold-at-gte-dot-net>
>>
>> If you need a capacitor, ( for either a tube or spark gap coil ) don't
>>have much money to spend, and your project can accommodate the extra room,
>>the quickest source for high voltage capacitors is used TV's. Specifically
>>the CRT - a small 12" monitor has about 0.001 MFD and will hold a voltage
>>around 50 KV, a 24" picture tube reads 0.003 MFD - you can almost double
>>the capacitance by wrapping foil on the outside of any picture tube.
>>
>>I've tried this on both small and medium size coils, it works great !
>
>hi phillip,
>
>aren't there going to be copious amounts of x-rays with this set up?
>
>bob golding
>
>
>