[Prev][Next][Index][Thread]

Re: Resonance



to: Philip

If you do connect a scope direct, use a 2 megOhm resistor in series between
the end of the probe and top of sec terminal.  This will provide a measure
of isolation.

Dr.Resonance-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: Resonance
> Date: Tuesday, January 26, 1999 5:08 AM
> 
> Original Poster: Philip <shadow42-at-totcon-dot-com> 
> 
> The compensator box on this probe is rated at 17-47pf. It is a Tek P6130
10x
> passive probe. Whatever that means. I do now see the effect on the
reading.
> Could I connect the coil dirrectly to the scope to eliminate the
capacitance?
> The scope is a HP 1740a. Any ideas would help
>    Thanks,
> Philip Mac Duffie
>