Re: Started winding today....

To: tesla-at-pupman-dot-com
Subject: Re: Started winding today....
From: Michael Tucknott <Michael.Tucknott-at-virgin-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
Date: Fri, 19 Mar 1999 16:45:44 -0700
Approved: twf-at-verinet-dot-com

Tesla List wrote:

El mega snip ola
> 
> Original Poster: Alex Crow <user-at-alexcrow.clara-dot-net>
> 
> I started winding my secondary today - my primary is nearly done, too,
> although working that copper tube is much tougher on the hands and arms
> than 0.71mm wire! I decided not to bother with a motor, so I made a
> half-box (ie three sides) which clamps the secondary former just enough

Hi Alex
What is the size of your secondary coil.
ie number of turns and H/D ratio.
See you in may in corby

Cheers Mike Tucknott  
*********************************************************************
If at first you don`t succeed......

It must be someone else`s fault so
Find them; Blame them; Make them pay

http://freespace.virgin-dot-net/michael.tucknott/tesla.html
*********************************************************************