[Prev][Next][Index][Thread]

Re: Primary Coil



In a message dated 99-10-15 07:42:16 EDT, you write:

<<   I am making a 4.5" x 30" TC and am going 
 > to wind 3/8" Cu tubing helical wound on
 >  a 45 degree angle. Though the secondary
 >  coils 1st wind ended up around 1.5" above
  > the primarys 1st wind will this undercouple
 > my TC? I would also appriciate any tips on
  > perfecting my design. BTW.. I am using a
  > 15KV 60ma NST
 
  >Chris >>

Chris,

Your coupling might turn out to be still a little tight, so I wouldn't 
worry about it.  See how it works.

John Freau