[Prev][Next][Index][Thread]

MMC help



Hey People!

    The panasonic cap's in the MMC program are .056uF rated 1600volts.
Couldn't I just string up 14 of these for my 15kv 30mA primary?  This
would keep the desired .056uF and would make the voltage rating
22400volts, correct?  But, I'm getting the clue it's not suggested
because they'd over heat...  How would I wire more of them up without
changing to a higher voltage rating or capacitance?  Would these 14caps
overheat?  Thanks for any advise.
-Bill