[Prev][Next][Index][Thread]

Equidrive-ing me crazy



I am curious about the capacitor size when they are placed in the
"equidrive" position. Say you have a coil that runs perfectly fine with
.02 uf wired in series with you primary coil...to run the equidrive, do
you need EXACTLY half (.01 uf) at each location? Or do you need EXACTLY
twice the total (.04 uf) because the caps are now wired in parallel to
themselves.

Thanks,

Dan
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.