frequency

• To: tesla-at-pupman-dot-com
• Subject: frequency
• From: "William Woods" <wwoods-at-mail.wsu.edu> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 28 Apr 2000 18:35:23 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hey People,

    I have a question.  Is it best to say the lower the frequency the
better with a large top load capacitance?  When making a top load should
I just shoot for a big one?  I calculated a total inductance frequency
of 90.75Khz with a 9" shere and 94.41w/8", and 98.61w/7".  What is a
good frequency to shoot for?  Should I redesign the coils on paper for a
lower frequency than these or higher?  or are these good values?
Thanks, all help is appreciated.
-Bill

• Prev: Re: SG - The anatomy of the spark?
• Next: Re: RF chokes
• Index(es):
  • Main
  • Thread