[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: flexible ducting



Bill (a.k.a. Gomez),

Good luck getting a catalog from them. It's almost impossible. Fortunately
it's unnecessary now that everything is on the Web. Check them out at
http://www.mcmaster-dot-com/ they even have online ordering and tracking....

Brian

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, August 02, 2000 11:03 PM
To: tesla-at-pupman-dot-com
Subject: Re: flexible ducting


Original poster: "Bill Lemieux" <gomez-at-netherworld-dot-com> 

On that fateful day 8/2/00 8:18 PM, thus spake Tesla list:

> Original poster: "Basura, Brian" <brian.basura-at-unistudios-dot-com>
> 
> Gomez,
> 
> McMaster-Carr has 16"x8' for $24.00 (p/n 55335K32). I made a huge toroid
> with three pieces and it was very cheep (compared to a spun Al toroid).
Make
> sure to call and asked for the case price. Turns out three pieces of 12"
> (full case) was only a couple dollars more than two pieces.

What?!?  A good deal at McMaster-Carr?  Unheard of!  I will definitely jump
on that, it is just what the doctor ordered.

I'm a little unclear on the rest of your post tho- does the 16 inch x 8 foot
come as one piece?  It would have to, the circumference (center of the
chord, actually) of my toroid will be at least nine feet, depending on
whether I decide to make the testing toroid 48" or 60" in the large
dimension.

A wonderful tip, thanks very much.  Guess I need to bug McMaster- Carr for
another catalog- getting catalogs from them is like pulling teeth.

- Gomez (Bill Lemieux)