[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Parallel and Series LCR Circuit Qs



on that fateful day 8/9/00 7:09 PM, Tesla list uttered:

> Original poster: Terry Fritz <twftesla-at-uswest-dot-net>

> See the following page that explains basically how I find the output
> impedance of a coil.  Usually, I do "trial and error" into the expected
> equivalent static load to find the best power to the arc.
> 
> http://users.better-dot-org/tfritz/impedance/impedance.html

In your MicroSim diagram, what is the lumped primary resistance (gap drop
plus primary wiring)?  It looks like it is 3 ohms, which seems awfully
small...

- Gomez (Bill Lemieux)

...............................................................
"How many cares one loses when one decides not to be something,
But to be SOMEONE."  - Coco Chanel