[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 12 inch coil



Using 16g wire, you'll get almost 1400 turns using the full 72 inch length.  
14g will be closer to 1000 turns.
Mike


> Original poster: "D.Wightman" <dwightman-at-mmcable-dot-com> 
>  
>  Hello everyone.. Recieved my 12 inch by 72 inch long secondary form. It is 
> made
>  of acrylic and cost 185 US dollars.. Here is the main question,, What 
guage 
> of
>  magnet wire should I use and how many turns. The power tranny is a
>  14400vac,,5kva pig..the caps are maxwell...i have heard that a ratio of 
4.5 
> to
>  1 would be good,, And 18 guage wire...My last coil was 8 inches in 
diameter 
> and
>  wound with 888 turns of number 22 magnet wire,, it performed very well, 
with
>  suprisingly few primary strikes..With number 18 wire at 4.5 to 1,, I will 
> get
>  well over 1000 turns??..Do you think maybe I should go with number 16
>  wire...Who on the list has experience with a 12 inch coil??. also maybe i 
am
>  sort of getting gun shy here since i was so pleased with the performance 
of 
> my
>  8 inch coil that im stuck on the pretence that a coil should never go over 
> 1000
>  turns,,,hmmmm..Thanks
>  
>