[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Excel MMC cap calculator



Original poster: Terry Fritz <twftesla-at-uswest-dot-net>

Hi Mike,

	Hey!  This is really neat!  In many ways it is far better than my feeble
MMCcalc program which is not a "perfectly polished GUI application" ;-))  I
will recomend it to those that don't like MMCCalc.

I might mention that the spark gap firing voltage is almost always the
transformer RMS voltage multiplied by the square root of two.  Some people
may not know to figure that out.

Super neat!  If it were a java thing maybe people that don't have Excel
could use something like that, but such is far beyond my skills... 

Cheers,

	Terry


At 04:29 PM 12/8/2000 -0500, you wrote:
>I posted an Excel file to http://hot-streamer-dot-com/mike/
><a href="http://hot-streamer-dot-com/mike/">hot-streamer-dot-com/mike/</a>
>It only does Terry's MMC formulae but it saves a lot of time if you were
>doing them by hand.  :- )
>
>--Mike
>