RE: G10

• To: tesla-at-pupman-dot-com
• Subject: RE: G10
• From: "Carver Banks" <cbanks-at-entek-international-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 21 Feb 2000 12:54:39 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

GRADE G-10- Light green color, continuous filament woven glass fabric grade,
impregnated with epoxy resin. Has excellent electrical values, Possesses low
moisture absorption, low dissipation factor, excellent electrical
characteristics over a wide range of humidities and temperatures. Will
withstand up to 284°F

-----Original Message-----
From: Tesla List [mailto:tesla-at-pupman-dot-com]
Sent: Monday, February 21, 2000 6:21 AM
To: tesla-at-pupman-dot-com
Subject: G10


Original Poster: "Brian H Le Page" <b.h.le-page-at-surrey.ac.uk> 

Hi all

I have been trying to find out what the English equivalent name for G10 is.
Nobody in the composites group here has heard of it.  Could someone please
post a description and specification.  All I have gathered so far is that it
is a phenolic composite.  Can anyone confirm/deny this?  What is the
reinforcement? What are it's mechanical properties?

Thanks.

Dr B

Dr Brian H Le Page
Composites Research Group
School of Mechanical and Materials Engineering
University of Surrey
Guildford
GU2 5XH
Tel +44 (0)1483 300800 ext 2439

• Prev: Re: schematics.........
• Next: Splicing (was Re: weather influence on TC performance)
• Index(es):
  • Main
  • Thread