Re: Form Material Info!!!

["Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi James, 

Thanks for sharing. BTW, for the lists data, what material is your form made
of? 

Bart 

Tesla list wrote: 
>
> Original poster: "James" <mustang3-at-home-dot-com> 
>
> Hi there coilers, 
>     I just got to put my .02 in. I built a secondary with minimal prep. It 
> carbon tracked almost immedatly. All secondarys of mine seem to die about 6 
> in from the bottom (high stress area?). I then made another one with 4 or 5 
> coats of varnish. It also carbon tracked. I then whipped out one more, I put 
> a least 20 coats of varnish on it. So far so good. 
>         My system uses a 14400 pole xmfr, 8 in. X 36 in. sec, and a 66Nf cap
> with a 
> static SG. I am currently getting 6 to 7 foot sparks(corona). 
>                                                                 James