Transformer design

• To: tesla-at-pupman-dot-com
• Subject: Transformer design
• From: "Mike" <arcsnsparks-at-parlorcity-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 07 Mar 2000 11:23:26 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi all
I have just completed and uploaded a VB6 program which does all the tedious
calculations needed for building iron core transformers from scratch or
rewinding old transformers. It has internal wire tables that go from 0000 to
40 AWG which are fully automated. It makes it capable of calculating wire
sizes and lengths for transformers at just about any voltage or current
needed. It does everything except pay for the copper and iron. Be sure to
read the two text files after you install the program, one has a diagram
which shows what measurements are needed for correct input. Questions, bug
reports, inaccuracies etc can be E-mailed to arcsnsparks-at-parlorcity-dot-com This
is my first VB6 program and I'm not a transformer expert either so there
could be errors. The program is freeware, The name is WinXformer and can be
downloaded at the following link. http://www.parlorcity-dot-com/zap/Files/

Mike KB9NZQ

• Prev: Odd Variac Control And Transformer Really Buzzing ??
• Next: RE: bypass cap source
• Index(es):
  • Main
  • Thread