[Prev][Next][Index][Thread]

Re: Avalon.....dooohh




Sorry...I have to correct this, I'm concius now and Al disks in the gap 
would be a bad thing....lol....unless I could insulate them from the 
shafting,,,,hmmmmmm

>Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com>
>
> >Original Poster: "Grayson B Dietrich" <electrofire-at-juno-dot-com>
> >
> >
> >
> >On Thu, 09 Mar 2000 13:50:08 -0700 Tesla List <tesla-at-pupman-dot-com> writes:
> > > Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com>
> > >
> > > Alright. Let's start with design.
> > > 8 Gap type? I like the Electrum gap best as far as design, I am
> > > thnking of
> > > something similar. 10 Gap series rotary?
> >
> >I would think that a new sort of  rotary would have to be created. One
> >with long parallel electrodes, perhaps 18" long 1" dia rods of tungsten
> >tapped to attche to the rotor frame, several disks of G-10 in the
> >interior. This idea could be extended to huge sizes, to handle most power
> >levels.
> >
> > >
> >Just a thought.
>
>I dunno, the inertial mass of the rods, and the mechanical problems might 
>be
>horrendous.
>
>I was thinking a large array of seried vertical disks mounted on a large
>horisontal shaft. Construction could be G-10, or UHMW, for the base,
>Aluminum disks, Thoriated Tungsten electrodes, Steel shaft, standard roller
>bearings, and a rather manly DC motor (I could scrounge one from a forklift
>:) they're like 36 or 48VDC -at- WELL over 100 A, I think they can go to 400A)
>more than enough power :)
>
>
>
>
>
> >
> >Grayson Dietrich
> >http://www.electrophile.8m-dot-com
> >
>
>
>
>Chris "Up all night recodeing the site" Boden
>The Geek Group
>www.geekgroup-dot-org
>members wanted
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail-dot-com
>
>

______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com