proposed 6" Tesla Design

• To: tesla-at-pupman-dot-com
• Subject: proposed 6" Tesla Design
• From: "Andy Cleary" <gemware2-at-dreamscape-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 22 Mar 2000 07:25:31 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

	Hello, a friend of mine has designed the following coil, the specs being
taken directly from wintesla.  If there is anything wrong, or anything that
could be improved upon, then please let me know.  Any other comments would
be greatly appreciated.  Thank You,

Primary Transformer Output Voltage (VAC)
15000.0000
Primary Transformer Rated Current (AMP)
 0.0600
Primary Transformer Input Frequency (HZ)
60.0000
Primary Transformer Input Voltage (VAC)
120.0000
Primary Coil Inside Diameter (IN)
 8.0000
Primary Coil Wire Diameter (IN)
 0.2500
Primary Coil Wire Spacing (IN)
 0.2500
Primary Coil Number of Turns
11.0000
Primary Coil Angle From Horizontal Plane (DEGREES)
30.0000
Secondary Wire Diameter (IN)
 0.0320
Secondary Coil Total Outside Diameter (IN)
 6.6200
Length of Secondary Coil (IN)
26.5000
Secondary Wire Gauge
20.0000
Secondary Turns/Inch
29.7247
Top Load Capacitance (PF)
13.2727
Sphere Radius/Toroid Tube Diameter (IN)
15.0000
Toroid Diameter Tube Center-to-Center (IN)
 6.0000
Primary Transformer PFC Rating (%)
75.0000

-Andy C.

• Prev: "No More Gaps" (that's a Selleys product here in Oz.)
• Next: Re: SRSG motor anomoly
• Index(es):
  • Main
  • Thread