Re: salt water caps

• To: tesla-at-pupman-dot-com
• Subject: Re: salt water caps
• From: "Brad DiGiovine" <Guido28-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 26 Mar 2000 17:30:29 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

thanks scott, i needed every bottle i had so i didn't go as far as breaking
them, i really appreciate the information!

brad

Tesla List wrote:

> Original Poster: "Bunnykiller" <bigfoo39-at-telocity-dot-com>
>
> Tesla List wrote:
> >
> > Original Poster: "Brad DiGiovine" <Guido28-at-mediaone-dot-net>
> >
> > i built a set of these and i guessed 0.1" for the thickness of the walls
> > of the wine bottles i used to caculate my capacitance, i was just
> > wondering if anyone knew if that was a safe guess or if there is anyone
> > who knows what the thickness of the wine bottles usually is.
> >
> > thanks
> > brad
>
> Hi Brad
>
> couldnt pass this one up ....
>
> so I broke a cheap wine bottle     .118"
>
> a good wine bottle                 .127"
>
> and a champagne bottle             .213"
>
> these are avg measures around the perimeter of the bottles...
> ( I also do home brewing ... just in case you are wondering why I have
> all these bottles  :)  )
>
> what I'll do when I'm bored ....   ;)
>
> Scot D

• Prev: Re: Hall effects probe
• Next: Re: oops ("Kickback" and untuned coils)
• Index(es):
  • Main
  • Thread