[Prev][Next][Index][Thread]
Re: Grinding sync motors with an angle grinder :-))
-
To: tesla-at-pupman-dot-com
-
Subject: Re: Grinding sync motors with an angle grinder :-))
-
From: Terry Fritz <twftesla-at-uswest-dot-net>
-
Date: Sat, 20 May 2000 09:14:04 -0600
-
Approved: twftesla-at-uswest-dot-net
-
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
-
In-Reply-To: <01bfc205$aa70afc0$52f6a118-at-default.tampabay.rr-dot-com>
Hi Sundog,
What went wrong with your first attempt? Are they are hints you can give
us that will help others avoid problems??
Cheers,
Terry
At 10:46 PM 05/19/2000 -0400, you wrote:
>Terry, all... pardon for a moment...
>
> WOOHOOO!!!! *dancing around the room* yea, yea, I gonna grind
>my own motor!
>
>Okay, now that I got it outta my system :) I've already tried the
>angle-grinder method once and destroyed a perfectly good
>motor...sooooo, I'll give it another try, following Terry's
>instructions. Mostly because I have no access to a machine shop
> But where 20 minutes of machine work will prevail, so will 3
>hours of jig-setup and 1 botched attempt.
>
>
>-----Original Message-----
>From: Tesla List <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
>Date: Friday, May 19, 2000 9:56 PM
>Subject: Grinding sync motors with an angle grinder :-))
>
>